Material: timber boards, sink, tap, wooden keyboard, plumbing fixtures

prep the wall with hot / cold and waste pipe

Cut some boards to create the cupboard. Take into consideration any obstacle ( pipes) depth and height of waste bottle

Draw your shelves on your side board and drill for wood dowels

assemble with wooden dowels and glue. Reinforce with some screw and metal brackets at the back

Cut your wooden keyboard to the right depth

Assemble and adjust to the wall. Cut some opening at the back of the cupboard to access pipes

Create some doors out of plywood

Create a template with exact position of sink and tap. It costed me £ 80 for bespoke toughen glass. The other cheaper option is acrylic sheet but it doesn't look as nice and it will scratch.

Cut your keyboard to allow for sink and tap. Install your toughen glass and sealed everything in position with silicone and superglue.

Enjoy !